portege p2000(1), Toshiba
[ Pobierz całość w formacie PDF ]
FIELD REPLACEABLE UNIT DOCUMENTATION
Portege
P2000 Series
GENERAL INFORMATION
Tools Required for Proper
Disassembly and Reassembly:
1. Phillips Screwdriver (Size 0)
2. Flat head Screwdriver
3. Case Separator
4. ESD Wrist Strap
5. ESD mat
6. Tweezers
Before attempting any of the following procedures,
make sure that the main battery and AC adaptor is
not connected to the unit and the environment in
which you are working on is protected from
Electro-Static discharge(ESD).
TOSHIBA
Tough Enough for Today’s World
TM
FIELD REPLACEABLE UNIT DOCUMENTATION
Portege
P2000 Series
TABLE OF CONTENTS:
TOSHIBA
Tough Enough for Today’s World.
TM
FIELD REPLACEABLE UNIT DOCUMENTATION
Portege
TM
P2000 Series
BATTERY PACK REMOVAL
OPTIONAL PC CARD REMOVAL
Battery
release
lever
Battery Pack
PC card
Eject button
1. Turn the computer upside down as shown.
2. Slide the
battery release lever
to the left to release
the battery.
3. Lift out the
battery
.
1. Press the
eject button
of the PCCard you want to
remove.
2. Press the extended eject button to pop the
PC card
out.
3. Grasp the
PC card
and remove it.
Note
: Before removing any PC Card device, make
sure it is “STOPPED” in the PC Card manager.
MEMORY MEMORY REMOVAL
Memory
cover
M2x2.5 black screws
M2x3 black flat head screw
Memory module
1. Turn the computer upside down.
2. Remove
two M2x2.5 black screws
securing the
memory
cover.
3. Remove
one M2x3 black flat head screw
securing
the memory module.
4. Disconnect the
memory module
from the top side
as shown by the arrow above.
TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION
Portege
TM
P2000 Series
HDD REMOVAL
HDD cover
M2x4 black screws
HDD connector
HDD assembly
1. Turn the computer upside down.
2. Remove
two M2x4 black screws
securing the
HDD cover
and lift it out.
3. Lift up the
rubber handle
and hold the HDD assembly
as shown above.
4. Disconnect the
HDD assembly
from the
HDD connector.
CAUTION:
Be very careful not to press on the TOP or
BOTTOM of the HDD. Pressure can destroy
data or damage the drive.
HDD REMOVAL
KEYBOARD REMOVAL
HDD pad
HDD rubber holder
M2x3 black flat head screw
5. Remove the
HDD rubber holder
and the
HDD pad
.
1. Turn the computer upside down.
2. Remove
one M2x3 black flat head screw
securing
the keyboard.
TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION
Portege
TM
P2000 Series
KEYBOARD REMOVAL
Latch
Keyboard
holder
M2x3 silver flat head screws
3. Unlatch the
keyboard holder
at the top of the keyboard.
4. Remove
two M2x3 silver flat head screws
securing
the keyboard.
KEYBOARD REMOVAL
TOP COVER REMOVAL
M2.5x6 black flat head screws
PJ445
M2x6
black
screws
M2x4
black
screws
Keyboard
Keyboard cable
Rubber cover/M2x4 brass screw
5. Lift up the
keyboard
and lay it on the palm rest.
6. Disconnect the
keyboard cable
from
PJ445
and lift out
the keyboard.
1. Turn the computer upside down.
2. Remove the rubber cover close to the HDD slot
and remove one M2x4 brass screw.
2. Remove the following screws from the bottom cover:
- 9 M2x6 black screws
- 2 M2.5x6 black flat head screws
- 2 M2x4 black screws and 1 M2x4 brass screw
TOSHIBA
Tough Enough for Today’s World.
[ Pobierz całość w formacie PDF ]